Assembling Personal Computer

Assembling Personal Computer.

Describe the Computer and Network Technology

Personal Computer Assembling explained.

COMPONENTS installed on Computer

A computer is a combination of 13 components.

where each other is integrated, so that if

one component is not working, then the computer does not

will function properly. But sometimes one

                               

although these components do not function well, but

computer can still work, only the component functions

those who can not be used but not

interfere with the computer work. For example in

soundcards, or a modem, although both types of components.

can not be operational, the computer can still be

enabled. But it would be different if the component is dead

is the processor or RAM or a monitor.

COMPONENTS REQUIREMENTS.

To assemble the necessary computer components - components as follows:
1. Mainboard
2. Processor
3. RAM (SD RAM / DD RAM)
4. Disk Drive / Floppy Disk
5. Hard disk
6. Casing which has a high power supply
7. ROOM CD / DVD ROOM read or write
8. Speaker
9. Keyboard
10. Mouse

11. Monitor
12. VGA
13. Soundcard

                                Above components are padasebuah standard PC components. There was also a optional component / option can be installed to complete these requirements, such as
   modems, printers, scanners, network cards and UPS / Stabilizer.
To get a good computer unit and

we have good low-selecting and sorting good product
which will be used, such as the MB is more than 50
kinds of brands, were each issued a series brands
diverse. For that we need information before
decide which components will be used.

BIOS

BIOS Setting.

                                 Basic Input Output System. Software installed on a computer chip to manage the basic operations such as screens, hard drives, memory, VGA, etc.. Part of the operating system that could identify the set of programs used to boot the computer, before placing the system disk. The BIOS is in ROM (Read Only Memory) of the system and generally stored permanently. Programs that use the microprocessor to

                 turn on the computer. The BIOS also manages data flow between computer operating systems and enhancement that is connected to the computer.

Peripheral Treatment did.

                 A computer peripheral support equipment from a PC. In general, the peripheral may include a keyboard, mouse, monitor, and printer. In general, peripheral experiencing problems caused by dust, water spray, and

TREATMENT

                 dirt. Can be used to clean equipment and materials as simple as:

Paintbrushes

Mini vacuum

Dry cloth or tissue

Cleaner / cleaner

Paintbrushes
Paintbrushes are equipment used to clean dust or dirt that remains in the periphery. The keyboard is a peripheral that is often exposed to dust and dirt that tetombol keyboard keys. Also the brush is also used to clean dust that hung on the monitor fentilasi among rselip and can also be used to clean the mouse ball that has begun to slow for the mouse-old mouse.

Mini vacuum
Mini vacuum cleaner is similar to the brush used to remove dust. But the vacuum much easier and cleaner. At the end of a mini vacuum cleaner equipped with a brush with a variety of sizes, designed to fit the corners lusempitnya the periphery. This very precise tool used to clean the keyboard, monitor fentilasi and air at the fan or fans, even very good for cleaning circuit motherboard.

Dry cloth or paper towels and cleaning fluids.
Dry cloth or paper towels used to clean the liquid waste that may result softdrink, ink or rain water that is fresh or dried yet. Tissue or dry cloth liquid manure is very dangerous if not cleaned immediately because this type of filth that can deliver currents can cause short circuit or damage to the periphery. Tissue can also be used to

facilitate the flow of ink in the printer cartridge injek, because it is easy to absorb liquid. While cleaning fluid used to clean stains or dirt that has dried up like a spark of printer ink. Used on the screen, casing, body monitors, printers and body.

                 Equipment needed to repair peripheral.

a) Screwdriver
Screwdriver is the most important tool in the peripheral improvement. Very useful screwdriver to dismantle and install peripherals to be improved further. Screwdriver is a variety of forms. Starting from screwdriver (+), screwdriver (-), and a screwdriver stars / flowers.

               

 To make improvements need to be prepared screwdriver periphery of various sizes.

b) Tools
To make improvements peripherals, used tools and tool combinations shark. Tools shark used to hold the screw head or a small jumper.

c) BRUSH THE BRUSH.
Brushes used to clean the peripheral components from dust and dirt that causes damage. Because the problem is often the cause of dirt periphery may not work well anymore.

d) MINI vacuum
Mini vacuum function is similar to the brush to remove dirt that is attached to the periphery. At the end of a mini vacuum cleaner equipped with a brush with a variety of sizes designed to fit the limited area of the corners of the periphery. This very precise tool used to clean the dirt found on the keyboard, monitor ventilation and air at the fan.

e) Dry cloth or paper towels and cleaning fluids.
                Dry cloth or paper towels used to clean the dirt that may be very difficult to clean using a brush or vacuum cleaner. Dirt or dust so thick that can hamper performance peripherals. Tissue can also be used to facilitate the flow of ink in the printer cartridge , because it is easy to absorb liquid. While cleaning fluid can be

               

used to clean the screen, casing, body monitors, printers and body.